Blue Sea BS 6010 Mini Dual Circuit Battery Switch with Knob simultaneously switches two isolated battery banks. 2 switch positions (ON-OFF). 2 battery inputs.
KEY FEATURES
- Simultaneously switches two isolated battery banks
- Ignition protected for installation aboard gasoline powered boats
- Case design allows surface or panel mounting
TECHNICAL DETAILS
- Switch Positions: 2 - On/Off
- Battery Combine: No
- Color: Red and Black
- Alternator Field Disconnect: No (Alternator Field Disconnect protects diodes in the alternator should the switch be switched to OFF while the engine is running. If not used to protect the alternator, an LED can be wired to the AFD terminals to indicate when the battery switch is in any position other than OFF.)
- Maximum Voltage: 32V DC
- Terminal Stud Torque: 13.56 Nm
- Continuous Rating: 300 Amps
- Intermittent Rating: 450 Amps
- Cranking Rating 30 Sec: 675 Amps per circuit. The current required by the starter motor before the engine starts. Cranking current varies significantly during the cranking cycle. Initially there is a large surge of current required to overcome the inertia and compression of the engine. This surge may be two to four times the average cranking current. Cranking current is used for sizing batteries, cables, and battery switches.
- Battery Inputs: 2
- Cable Clearance for 4/0 AWG Cables: 28.45 mm
- Recommended Cable Size: 4/0 AWG (120mm²)
- Mounting Holes: #10 screws
- Terminal Stud Size: 3/8" - 16 (M10)
- Weight: 0.36 kg