Blue Sea BS 7654 Mini Add-A-Battery Plus Kit is a complete small boat battery management system.
Charge two batteries with or without shore power.
- for alternators up to 65A
- includes a Dual Circuit Plus Battery Switch 6011
- three-stage 10A charger 7604 with integrated 65A automatic charging relay and an LED remote display
KEY FEATURES
Dual Circuit Plus Battery Switch 6011:
- switches two battery banks simultaneously while maintaining battery bank isolation
- you can combine two battery banks in case of a low start battery
- IP66 - protects against strong jet water
BatteryLink BS 7604 Battery Charger:
- Charge two batteries with or without shore power using a multi-stage 10A charger and integrated 65A automatic charging relay (ACR).
- Charging without shore power: You can charge two isolated battery banks with the three-stage 10A charger using AC shore power.
- Charging with shore power: You can charge both the starting and auxiliary batteries using the DC power from the alternator through the integrated 65A ACR.
- Battery temperature compensation extends battery life
- Start isolation protects electronics from voltage drops
- includes LED remote display for charge status at the helm
- insulating covers
- one-piece, corrosion-resistant flange nuts ensure a secure connection
TECHNICAL DETAILS Battery Switch BS 6011
- Switch Type: Dual Circuit Plus
- Color: red
- Switch Positions: 3
- Combine Batteries: yes
- Alternator Field Disconnect: No
- Maximum Voltage: 32V
- Continuous Rating: 300A
- Intermittent Rating: 450A (5 min)
- Cranking Rating 30 sec.: 675A per circuit
- Battery Inputs: 2
- Cable Clearance for 4/0 AWG cables: 28.45mm
- Recommended Cable Size: 4/0 AWG
- Weight: 0.36 kg
TECHNICAL DETAILS BatteryLink BS 7604 Battery Charger
- Output Current: 10A
- Nominal Voltage: 12V DC
- Number of Outputs: 1 negative
2 positive - Battery Terminal Torque: 6.78 Nm
- Continuous Rating: 65A
- Intermittent Rating: 115A
- Input Voltage Range: 90-265V AC
- Frequency Range: 50/60Hz
- Float Voltage: 13.5V DC typ.
- Battery Types: AGM
Lead Acid
TPPL - Recommended Cable Size: 10 AWG Ground Cable
6 AWG Positive Cable - Max. Battery Cold Cranking Amps: 850CCA
- Maximum Cable Size: 1/0 AWG (50mm)