Blue Sea BS 6011 Mini Dual Circuit Battery Switch simultaneously switches two isolated battery banks. 3 switch positions (ON-OFF-Combine). 2 battery inputs.
KEY FEATURES
- Simultaneously switches two isolated battery banks or combines battery banks for all loads
- Allows switching between battery banks without power interruption
- Ignition protected for installation on gasoline powered boats
- Housing design allows surface mounting or panel mounting
TECHNICAL DETAILS
- Switch Positions: 3 - On/Off/Combine
- Battery Combining: Yes
- Color: Red or Black
- Alternator Field Disconnect: No (Disconnect switch protects the diodes in the alternator if the switch is set to OFF while the engine is running. If the disconnect switch is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position other than OFF.)
- Maximum Voltage: 32V DC
- Terminal Stud Torque: 13.56 Nm
- Continuous Rating: 300 Amps.
- Peak Rating: 450 Amps
- Cranking Rating 30 Sec.: 675 Amps per circuit. The current required by the starter before starting the engine. The cranking current varies significantly during the start cycle. Initially, there is a large current surge required to overcome the inertia and compression of the engine. This surge can be two to four times the average cranking current. The cranking current is used for sizing batteries, cables, and battery switches.
- Battery Input: 2
- Cable Clearance for 4/0 AWG Cable: 28.45 mm
- Recommended Cable Size: 4/0 AWG (120mm²)
- Mounting Holes: #10 Screws
- Terminal Stud Size: 3/8" - 16 (M10)
- Weight: 0.36 kg