{"product_id":"bilgenpumpe-12v-tauchlenzpumpe-32-l-min-1890-l-h","title":"Bilge Pump 12V | Submersible Bilge Pump 32 l\/min (1890 l\/h)","description":"\u003cp data-path-to-node=\"13\"\u003e\u003cb data-path-to-node=\"13\" data-index-in-node=\"0\"\u003eThe essential protection against water in the hull\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"14\"\u003eWhether it's rainwater, spray coming over the bow, a dripping stuffing box, or condensation from the refrigerator – water in the bilge is completely normal on boats. The important thing is that it is quickly and reliably pumped out. The \u003cb data-path-to-node=\"14\" data-index-in-node=\"245\"\u003eNuova Rade 12V submersible bilge pump with 32 l\/min\u003c\/b\u003e is exactly the right tool for this. It is completely waterproof (submersible) and draws water directly from the deepest point of the hull.\u003c\/p\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eClever design for clean operation\u003c\/b\u003e Not only water collects in the bilge, but often also dirt, hair, or small impurities. To prevent the pump impeller from blocking, the Nuova Rade pump has an integrated filter base (strainer). The clever part: Thanks to a simple snap-on fastener, you can separate the actual motor unit from the strainer with one hand. This allows the strainer to be cleaned in seconds without having to dismantle hoses or use tools.\u003c\/p\u003e\n\u003cp data-path-to-node=\"16\"\u003e\u003cb data-path-to-node=\"16\" data-index-in-node=\"0\"\u003eDurable marine quality\u003c\/b\u003e The pump is specially designed for the harsh environment on the water. The drive shaft is made of high-quality, corrosion-resistant stainless steel, while the housing is made of tough ABS plastic. The cable outlets are also waterproof sealed to prevent short circuits caused by penetrating moisture.\u003c\/p\u003e\n\u003cp data-path-to-node=\"17\"\u003e\u003cb data-path-to-node=\"17\" data-index-in-node=\"0\"\u003eFlexible in use\u003c\/b\u003e This pump is classically operated manually via a switch panel at the helm. \u003ci data-path-to-node=\"17\" data-index-in-node=\"102\"\u003e💡 Our tip for even more safety:\u003c\/i\u003e Combine this bilge pump with a \u003cb data-path-to-node=\"17\" data-index-in-node=\"184\"\u003efloat switch\u003c\/b\u003e. This way, the pump switches on fully automatically as soon as the water in the bilge reaches a critical level – even if you are not on board!\u003c\/p\u003e\n\u003ch4 data-path-to-node=\"18\"\u003e\u003cb data-path-to-node=\"18\" data-index-in-node=\"0\"\u003eTechnical Data\u003c\/b\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli data-path-to-node=\"19,0,0\"\u003e\n\n\u003cb data-path-to-node=\"19,0,0\" data-index-in-node=\"0\"\u003ePump type:\u003c\/b\u003e Submersible bilge pump (not automatic)\u003c\/li\u003e\n\n\u003cli data-path-to-node=\"19,1,0\"\u003e\n\n\u003cb data-path-to-node=\"19,1,0\" data-index-in-node=\"0\"\u003eFlow rate:\u003c\/b\u003e 32 liters \/ minute (corresponds to approx. 1890 liters \/ hour or ~500 GPH)\u003c\/li\u003e\n\n\u003cli data-path-to-node=\"19,2,0\"\u003e\n\n\u003cb data-path-to-node=\"19,2,0\" data-index-in-node=\"0\"\u003eOperating voltage:\u003c\/b\u003e 12V DC (direct current)\u003c\/li\u003e\n\n\u003cli data-path-to-node=\"19,3,0\"\u003e\n\n\u003cb data-path-to-node=\"19,3,0\" data-index-in-node=\"0\"\u003eCurrent consumption:\u003c\/b\u003e Low (conserves battery capacity)\u003c\/li\u003e\n\n\u003cli data-path-to-node=\"19,4,0\"\u003e\n\n\u003cb data-path-to-node=\"19,4,0\" data-index-in-node=\"0\"\u003eHose connection (Outlet):\u003c\/b\u003e 19 mm (3\/4 inch) – Standard size for bilge hoses\u003c\/li\u003e\n\n\u003cli data-path-to-node=\"19,5,0\"\u003e\n\n\u003cb data-path-to-node=\"19,5,0\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e Impact-resistant ABS housing, stainless steel shaft\u003c\/li\u003e\n\n\u003cli data-path-to-node=\"19,6,0\"\u003e\n\n\u003cb data-path-to-node=\"19,6,0\" data-index-in-node=\"0\"\u003eCleaning:\u003c\/b\u003e Removable dirt filter base (Snap-On System)\u003c\/li\u003e\n\n\u003cli data-path-to-node=\"19,7,0\"\u003e\n\n\u003cb data-path-to-node=\"19,7,0\" data-index-in-node=\"0\"\u003eArea of application:\u003c\/b\u003e Fresh and salt water\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"20\"\u003e\u003cb data-path-to-node=\"20\" data-index-in-node=\"0\"\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli data-path-to-node=\"21,0,0\"\u003e1x Nuova Rade submersible bilge pump 12V (32 l\/min)\u003c\/li\u003e\n\n\u003cli data-path-to-node=\"21,1,0\"\u003eIntegrated, sealed connection cable\u003c\/li\u003e\n\n\u003cli data-path-to-node=\"21,2,0\"\u003eOperating\/installation instructions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Nuova Rade","offers":[{"title":"Default Title","offer_id":52726185886038,"sku":"30670","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0912\/9751\/3814\/files\/30670.png?v=1772462217","url":"https:\/\/www.waypoint-gps.com\/en\/products\/bilgenpumpe-12v-tauchlenzpumpe-32-l-min-1890-l-h","provider":"Waypoint-GPS","version":"1.0","type":"link"}